![]() Sony (UBP-X500) 4K Ultra HD Blu-ray Disc Player -> Denon AV-R (X4500H) Zone 2 HDMI-OUT -> Philips HSB HDMI-IN 4 -> Philips (PicoPix Max) Projector MY HIGHLIGHT: Even without the HDMI-Extender Setup it is not working (except at least! a Sony Splash Screen) with the following Combination: Reason for this Test: I also wanted to test if minimizing the HDMI-Chain Lenght will change the situation -> No, same situation/problem :-/ I moved the Philips projector and the HDMI-Extender Receiver to the room where the other Equipment incl. Just to Rule out a problem with the Zone 2 Feature and the “Zone 1 Monitor 2” Screen Feature) (Just for completeness I will also test if the problem is existing when I use the “Zone 1 Monitor 1” (“HDMI MONITOR 1”) AKA Main Output, which is connected normaly to a Philips Ambilight TV. UHD BR Player -> HSB -> HDMI-Extender Setup -> Projectorĭoes this make any sense for you or ? Is the AV-R and HSB together responsible for reducing the Signal Quality?Īfter that I reintegrated the AV-R, Changed Output also for testing from Zone 2 to “Zone 1 Monitor 2” Feature to be able to play around with the HDMI Output Options ( Output Settings AVR-X4500H) but also no chance to get it working with the AV-R “Tuning”. I made a new test: Removing the AV-R by connecting the Sony UHD-BR Player directly to HSB HDMI-IN 2 and with that it IS working even when the HSB is located before the HDMI-Extender Transmitter! Very interesting updates from this weekend: Hello I realy appreciate your response and the interesting in my (sure not very wide spreaded and economically not interesting) problem! They’re bogged down with a lot of tasks so I prefer to wait till a few of the top bugs are squashed before adding a complex issue report. I can’t spot an obvious issue on PPM side, if you have reason to believe there’s an issue on PPM, let me know. AppleTV -> AV-R -> HSB -> HDMI-Extender Setup -> Projectorĭo you (or maybe see a possibility how we can trace also on the PPM, why there is some EDID (?) HDMI-Sync Problem when using Setup #3?.FireTV 4K -> AV-R -> HSB -> HDMI-Extender Setup -> Projector.UHD BR Player -> AV-R -> HSB -> HDMI-Extender Setup -> Projector.ALL DEVICES -> AV-R -> HDMI-Extender Setup -> HSB -> Projector.ALL DEVICES -> AV-R -> HDMI-Extender Setup -> Projector.With that, everything is working again also when using the UHD-BR Player (!) So instead of having the HSB connected before the HDMI-Extender Transmitter, it is now behind the HDMI-Extender Receiver: I have relocated the Hue HDMI Sync Box (HSB) again back to the (Bed)Room where the Projector is located. But as described in my initial post yesterday, also this before working setup is not working anymore (I have attached two videos IMG_343*_Setup-which-worked-before.MOV of that as well) BTW: In this initial setup also the mentioned cables from “PureMounts” and “KabelDirekt” where used locally on the Hue HDMI Box side. HUE SYNC BOX CONNECTING FULLI have asked the Philips Hue Beta Team how we can collect more logs from the Hue Sync Box, especially after my newest observation (With by the way a full set of new and other cables, altough with the desired setup it also wasnt working with them):īUT and this is Important: I used the Unknown HDMI cable in the same position when it worked initially, even with 4K UHD HDR Discs and FHD Blu-Ray Discs (Recap: While the Hue HDMI Box was in the same Room with the projector, so the AV-R was connected directly to the HDMI-over-CAT Transmitter and the Receiver was connected to the Hue HDMI Box HDMI1). The sync box seems to have issues driving the HDMI extender, reducing the signal quality to the point where the PPM loses lock. Indeed it seems to be volume related ThanksĪt least then you don’t have to worry about anything damaging the PPM. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |